Farval M25000 Series

M2500 Series

The M2500 Series valve manifolds are the principal components of a Single Line central lubricating system. The modular construction makes the system easy to install, and can be modified and maintained without removing any tubing. Operation of all valves in the system can be monitored by a single cycle indicator switch. Up to 20 bearings can be lubricated from one manifold assembly and up to 20 manifolds can be included in a system.
Zone control components can be used to build a system of any size and can be divided into individually controlled and monitored zones. This permits varied cycle times, rapid trouble-shooting and easy maintenance.

TEN FEATURES THAT MAKE THE DIFFERENCE

VITON O-rings standard to protect against high heat & synthetic lubricants.
Form, fit and functional interchangeable with
all major competitive brands.
Dual ported valves can be purchased as a single outlet type (S) and converted to twin outlet (T). This reduces your inventory by 50%
(see bulletin 69).
SAE straight thread, NPSF or BSPP – all standard.
Integral or in-line solenoid valve for zone control.
Easy to assemble and replace valves without removing tube.
Operating pressures to 3,500 psi. .005 to .080 cubic inch discharge volumes.
Nickel plating optional. (Consult factory.)
Three to Ten section valve manifolds available.

M2500 SPECIFICATIONS
Maximum operating pressure:
3500 psi (241 BAR)
Discharge per cycle: . . 005 (.08cc) to .080 (1.31cc)
Lubricants:
Oil to NLGI #2 grease
Seals: VITON O-rings (70 durometer)
Max. temperature: 350ºF (163ºC)
Material: Steel with zinc plating, electroless nickel plating available on special order.