Memolub 24VPLC Controlled
The MEMOLUB® 24V-PLCd model lubricator is especially designed for PLC-controlled machinery (or mobile equipment) where a 24VDC power supply is available. It is ideal for lubricating a wide variety of robots, conveyors, and OEM applications. The MEMOLUB® 24V-PLCd can be direct-mounted for single-point applications, or remote-mounted using pipe or flexible tubing. In addition, lubrication from 2 to 12 lube points is possible with a MEMOLUB® Multi-Point Lubrication System.
The MEMOLUB® 24V-PLCd lubricator has a unique design utilizing a Power-Through Memo which contains the electrical connections needed to power the unit. This gives the user the ability to quickly remove the lubricator for fast lubricant cartridge change-out while avoiding contact with the electrical connections. A 5-foot extension cable on the Power-Through Memo is connected to a PLC-controlled power supply. The PLC program controls the frequency of lubrication output cycles, which may be based upon elapsed clock hours, machine cycles, a count of parts produced, or other desired criteria. Further control is provided by adjusting the volume of lubricant ejected on each cycle. A set of 8 special stroke-limiting washers are supplied with each lubricator. When the Power-Through Memo is used without washers (yielding full piston stroke), the output volume at each stroke is 0.635cc. For each washer (including the “C”-shaped lock washer) inserted into the brass adapter of the Power- Through Memo, the output volume is decreased by 0.04cc per stroke.
