Memolub EPC
The MEMOLUB® EPC offers the advantage of providing automatic lubrication to machines that are infrequently or intermittently used, avoiding the problems of over lubrication.
The lubrication process can be turned on and off in concert with the machine being lubricated or manually using a simple switch.
The MEMOLUB® EPC is battery powered and requires no external power source. It operates under its own MEMO program that you preset. This controls the frequency of lubrication cycles and volume of lubricant injected.
The MEMOLUB® EPC can be mounted directly on the bearing or remote from the bearing using pipe or flexible tubing. It may be used as a Multi-Point System lubricating from 2 to 12 lube points and is available in any of the three MEMOLUB® sizes.
The 12 inch cable that extends from the bottom of the lubricator serves to interrupt the electric circuit to the drive motor. When the circuit is closed the MEMOLUB® first goes through an output cycle and then proceeds to operate under its own preset program control. When the circuit is opened the lubrication process stops.
Extension wire kits are also available in 15 and 30 foot lengths. Eack kit comes with quick connectors to easily remove the MEMOLUB® lubricator during cartridge change-out.
