Memolub Splitter
The 2-Point MEMOLUB® System is especially designed for the economical lubrication of two bearing shaft systems, for example, electric motors, pumps, fans, etc. The Splitter-MEMO evenly divides the volume of lubricant during each ejection cycle of the MEMOLUB® HPS lubricator. It transforms a single MEMOLUB® HPS lubricator into a two-outlet lubricating system.
The 2-Point MEMOLUB® System includes a MEMOLUB® HPS lubricator with Splitter-MEMO and push-in tube fittings installed on a Mounting Bracket. Tubing and push-in bearing fittings are purchased separately. Tubing in various lengths, pre-filled with the desired lubricant, is also available to further simplify the installation process.
The system can be used with any of the three sizes of MEMOLUB® HPS lubricators, the Standard Model 120, the Mega Model 240 and the Giga Model 480. They can also be used with any of the power options available with the MEMOLUB®. The 2-Point Memolub® System can be used only in grease applications.
The Splitter-MEMO replaces the brass fitting of the normal MEMO. The black plastic timing ring holder and three colored timing rings are used with the Splitter-MEMO to program the frequency of lubricant ejection cycles. The black plastic timing ring holder is fit onto the Splitter-MEMO in the same manner as the brass fitting of the standard MEMO. Refer to Output Programming chart for output rates. Retrofitting Retrofitting a MEMOLUB® HPS lubricator in the field into a 2-Point MEMOLUB® System may require recharging the Splitter-MEMO with the correct grease being used. Splitter-MEMOs purchased without a MEMOLUB® HPS lubricator are delivered pre-charged with a lithium based grease. If an incompatible grease or a special grease (e.g. food grade) is to be used, it will be necessary to flush and recharge the Splitter-MEMO.
