330.405.2100
Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today!
G3’s flexible design works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications.
Three controllers to choose from with multiple zone and feedback options. Includes one adjustable pump element–standard, plus room for two more. Multiple reservoir choices and more! The ultimate in flexibility–for a high value, custom fit on your application.
Work faster and smarter with Graco’s exclusive Data Management System (DMS™). Find out exactly how your lubrication system is performing and how well it’s lubricated. Tracks history, provides data protection, upload or download data using a simple USB flash drive.
| G3 Automatic Lubrication Pump | |
| Maximum Working Pressure | |
| Maximum Working Pressure |
5100 psi
|
| Power | |
| 100–240 VAC |
0.8 A current, 90 VA Power, 47/63 Hz, Single phase
|
| 12 VDC |
5 A current, 60 W, inrush/locked rotor 12 A
|
| 24 VDC |
2.5 A current, 60 W, inrush/locked rotor 6 A
|
| Outputs — Alarm Relay | |
| Rated Load |
Inductive: 0.2 A at 125 VAC, 1 A at 30 VDC
|
| Max Operating Voltage |
Inductive: 250 VAC, 220 VDC
|
| Max Operating Current |
Inductive: 1.5 A (AC), 1.5 A (DC)
|
| Max Switching Capacity |
Inductive: 25 VA, 30 W
|
| Min Permissible Load |
Inductive: 10 μA, 10m VDC
|
| Outputs — Vent Valve | |
| Required Vent Valve Type |
Normally Closed
|
| Output Voltage 100/240 VAC |
24 VDC
|
| Output Voltage 12 VDC |
Input Voltage
|
| Output Voltage 24 VDC |
Input Voltage
|
| Max Operating Current |
2 A
|
| Max Operating Power |
48 W
|
| Outputs — Low Level (Dry Contact) | |
| Contact Rating |
10 Watts Maximum
|
| Switch Rating |
200 VDC Maximum
|
| Switching Current |
0.5 A Maximum
|
| Carry Current |
1.2 A Maximum
|
| Inputs — Cycle Pressure, 1, 2, 3, Machine Count | |
| Required Switch Type |
Normally open (sink, source, or dry contact)
|
| Sensor Voltage 100/240 VAC |
24 VDC
|
| Sensor Voltage 12 VDC |
Input Voltage
|
| Sensor Voltage 24 VDC |
Input Voltage
|
| Load Current 100/240 VAC |
22mA @ 24 VDC
|
| Load Current 12 VDC |
11mA @ 12 VDC
|
| Load Current 24 VDC |
22mA @ 24 VDC
|
| Maximum Residual Voltage 100/240 VAC |
4 V
|
| Maximum Residual Voltage 12 VDC |
2 V
|
| Maximum Residual Voltage 24 VDC |
4 V
|
| Maximum Off Current 100/240 VAC |
1.5 mA
|
| Maximum Off Current 12 VDC |
1 mA
|
| Maximum Off Current 24 VDC |
1.5 mA
|
| Input Impedance |
1.1
|
| Response Time |
60 ms
|
| Cycle Rate |
8.0 Hz (50% duty cycle)
|
| Fluid Grease Models |
Grease NLGI 000 — #2
|
| Fluid Oil Models |
At least 40 cSt oil. Oil units with low level must have at least 80 cSt.
|
| Pumps |
Up to 3
|
| Pump Output – 2 spacers |
0.12 sq in (2 sq cm) / min per outlet - 2 spacer
|
| Pump Output – 1 spacer |
0.18 in 3 (3 cm3) / min per outlet - 1 spacer
|
| Pump Output – 0 spacers |
0.25 in 3 (4 cm3) / min per outlet - 0 spacers
|
| Pump Outlet |
1/4-18 NPSF. Mates with 1/4-18 NPT male fittings
|
| Reservoir Size |
2 l
|
| IP Rating |
IP69K
|
| Sensor Inputs |
3 (any of pressure or cycle)
|
| Sensor Inputs |
1 (machine count)
|
| Ambient Temps |
-13°F to 158°F
|
| Weight (Dry - includes power cord and plug) Without follower plate |
13.3 lb
|
| Weight (Dry - includes power cord and plug) With Follower plate |
14.2 lb
|
| Wetted Parts |
nylon 6/6 (PA), trogamid T5004-060, zinc plated steel,carbon steel, alloy steel, stainless steel, nitrile rubber(buna-N), bronze, nickel plated alnico, chemically lubricatedacetal, aluminum, PTFE, Grillamid
|
| Sound Data |
<60 dB
|
