This remove error
Lubricators – Electromechanical

Perma Star Control Time

Perma Star Control Time
Similar to the perma STAR VARIO, the STAR CONTROL TIME delivers precise amounts of lubricant and its operation is temperature independent. The unique feature of STAR CONTROL TIME is its connection to the machine's control unit. Power (direct voltage) and control come from the machine. This feature makes the STAR CONTROL TIME ideally suited to equipment where lubrication is to take place only when the machine is in operation and where a feedback signal to PLC is required.

TIME - Product Overview

Product Characteristics

  • Fully automatic, temperature independent and precise
  • Transparent plastic housing
  • Electromechanical drive (external power supply required)
  • Re-usable drive is environmentally friendly
  • Three different volumes available (LC-unit 60cc, 120cc, 250cc) - exchange on site possible
  • Various discharge amounts
  • Operating temperature: -10° to 50° C / 14° to 122° F
  • Pressure build-up: max. 5 bar / 75 psi
  • Protected against dust and water (IP54), non-corrosive
  • Ex-version available upon request


  • Improved safety and lower costs than manual lubrication
  • Controlled and permanent lubrication - small amounts in short intervals
  • Power supply via machine (no battery pack exchange required)
  • Works independent of temperature and vibration
  • LED signals operating conditions (operating, empty, malfunction)
  • Re-usable drive unit
  • Transparent housing permits visibility of remaining lubricant
  • Non-corrosive transparent plastic housing
  • Pressure build-up to 5 bar / 75 psi allows use of flexible tube extensions up to 9 ft
  • Discharge amounts can be selected according to individual lubrication point requirements and depending on machine operating time
  • Signals current operating conditions to PLC
  • Exchange manually - no tools required


perma STAR CONTROL is used for lubrication of roller and sliding bearings, chains, open gears, guides and seals. Machine downtimes can be reduced drastically when perma STAR CONTROL is used in applications that require lubrication to take place only when the machine is running. Connection to PLC is possible.

Technical Data

Technical data
Housing design
Electromechanical, external power supply (15...30V DC / typ. 0.2A)
Exchange set
Lubricant filled LC-unit
Discharge period
Lubricant volume
60cc (2.03oz), 120cc (4.06oz), or 250cc (8.45oz)
Ambient temperature
-10° to 50° C / 14° to 122° F
Pressure build-up
Max. 5 bar / 75 psi
60cc: 71mm x 142mm
120cc: 71mm x 165mm
250cc: 71mm x 215mm

The main difference between the battery-operated STAR VARIO and STAR CONTROL is that the perma STAR CONTROL is directly connected to the machine's control unit. Power (direct voltage) and control come from the machine. The lubrication system only works when power is supplied by the machine.

STAR CONTROL TIME Settings & Discharge Chart
1 Month
3 Months
6 Months
12 Months

S60 (60cc)
8.33 cc/100hr

2.78 cc/100hr

1.39 cc/100hr

0.69 cc/100hr

M120 (120cc)
16.67 cc/100hr

5.56 cc/100hr

2.78 cc/100hr

1.39 cc/100hr

L250 (250cc)
34.72 cc/100hr

11.57 cc/100hr

5.79 cc/100hr

2.89 cc/100hr

Follow Us
fdjohnson fdjohnson fdjohnson
Sitemap | 1933 Case Parkway North Twinsburg, OH 44087 - 330.405.2100 | © 2013 FD Johnson