This remove error
Control and Monitoring

TC-1000 Solid State Timer/Counter

TC-1000 Solid State Timer/Counter

The TC-1000 Solid State Timer/Counter is a microprocessor based multi-use controller dedicated to the operation of centralized lubrication systems.

The TC-1000 schedules lube frequency either on a time or stroke/cycle basis in values ranging from 1-9999. The pump run interval is also selectable in time or counts over the same range.

The TC-1000 is easily programmed in the fi eld using four mini push-buttons. No special training or knowledge of computer language is necessary. During power down or outage, data is saved in EEPROM (Electrically Erasable Programmable Read Only Memory). When power is restored, counting and pump status is restored to values prior to loss of power.

Available for 115 VAC, 230 VAC, 12 VDC, or 24 VDC operation. Pump Output voltage is the same as supply voltage.

Follow Us
fdjohnson fdjohnson fdjohnson
Sitemap | 1933 Case Parkway North Twinsburg, OH 44087 - 330.405.2100 | © 2013 FD Johnson