MGO Divider Valves

Trabon MGO Series-Flo® Divider Valves are designed for heavy duty service where, wide temperature variations and high pumping volumes may be expected. Ideal for large circulating oil systems or hydraulic balancing systems which are found in paper and rubber mills.

A typical MGO Series-Flo® Divider Valve Assembly (to the right) consists of an inlet section, end section and three valve sections. This basic system will serve up to six points and, by adding valve sections, it is possible to increase the number of points which can be served up to a maximum of 22.

The MGO valve sections are available in various output per piston cycle (see specifications). Each twin (T) section has 2 outlets, one from each side of the section. Each single (S) section has 1 outlet on either side but one outlet must be plugged to operate properly.