Trabon MX Series-Flo® Divider Valves are designed for heavy service and are ideal for large steel mill systems and similar applications. For modular version having the same output capacities, please contact us about the MXP Divider Valves.
A typical MX Series-Flo® Divider Valve Assembly consists of an inlet section, end section and three to ten valve sections. The basic divider assembly will serve between three and twenty lube points. The MX valve sections, which have built-in outlet check valves, are available in various output per piston cycle sizes. Each twin (T) section has two outlets, one from each side of the section. Each single (S) section has one outlet on either side, but one outlet must be plugged to operate properly. For applications with continuous oil lubrication (Meter-Flo) the built in outlet check valves may be removed.